If you are a new OXVA user, you might want to know how to properly fill your OXVA Xlim Vape Pod Kit. It may appear easy, but doing it right will make a world of difference in taste, coil life, and overall vaping experience. Since many new vapers are in the process, some spill their e-liquid or even experience burnt coils, simply because they do not know how to fill their vape correctly.
The OXVA Xlim is a refillable pod system, so you’ll be refilling the pod regularly instead of throwing it in the trash. The good news is that once you completely understand the steps, it is quick and simple to refill. Learning how to fill vape pod systems can save money and provide you with more flavour in your e-liquid. In the UK, a vaping survey discovered that 68% of vapers admit a preference for refillable pod systems over disposables due to their environmental and economic benefits.
In this guide, we’ll walk you through everything you need to know: from understanding the device components to the OXVA Xlim refill guide, choosing the right e-liquid, and even following UK regulations. By the time you’re done, you’ll not only know how to prevent leaks and spills, but you’ll also know how to maintain your device so that it continues to perform like new.
So get your kit and let’s start with the basics of it before we do a step-by-step guide on how to refill it correctly.
Understanding the components of the OXVA Xlim Vape Pod Kit
Before we learn how to Properly Fill Your OXVA Xlim Vape Pod Kit, it’s important to get familiar with its main parts. Think of this as understanding the “engine” of your vape – once you know what each piece does, filling and maintaining it becomes much easier.
The OXVA Xlim is a refillable pod system, which means the pod itself is designed to be filled with your favorite e-liquid rather than replaced every time. With a 2ml pod capacity, each pod is compliant with TPD UK regulations, and you won't be able to overfill your vape beyond the legal limit. You also have a built-in coil located inside the pod that is a small heating element to convert your vape juice into clean vapor. There are various coils with different resistances available (for example, 0.6Ω and 0.8Ω), and these directly influence how strong your flavor will be and how warm your vape will become.
Attached to the pod is the device body, which holds the battery. The battery powers the coil and usually lasts a full day for an average vaper, depending on how often you puff. The pod coil resistance, pod capacity, and e-liquid compatibility all work together to deliver the experience OXVA is known for – strong flavor and consistent performance.
Understanding these components makes it clear why careful filling is key. Overfilling can damage the coil, while not filling enough might burn it out quickly. That’s why in the next section, we’ll look at the OXVA Xlim refill guide step by step so you can avoid mistakes and enjoy a clean, flavorful vape every time.
Many vapers confuse e-liquid with e-juice. Learn the difference in our guide on E-Liquid and E-Juice Explained
Step-by-step guide on how to Properly Fill Your OXVA Xlim Vape Pod Kit
Now that you know what each part does, let’s get into the exact process of how to Properly Fill Your OXVA Xlim Vape Pod Kit. This process might feel a little tricky the first time, but once you follow it correctly, it becomes second nature. The goal is to refill safely without wasting e-liquid, preventing leaks, and making sure your pod lasts as long as possible.
Here’s how you do it:
1. Remove the Pod
Gently pull the pod out of the device body. Since the OXVA is a refillable pod system, the pod is designed to come out easily. Hold it upright to avoid spills and check if your pod coil looks clean and dry before filling.
2. Locate the Filling Port
On the side of the pod, you’ll see a small fill port covered with a rubber plug. This is where you’ll add your vape juice. Many people who search “how to refill OXVA pod” miss this detail and try filling from the mouthpiece, which causes leaks. Always use the side fill port.
3. Remove the Rubber Plug
Carefully lift the rubber plug to open the fill port. Make sure you don’t damage it, as the plug is what prevents your pod from leaking later. This step is key in almost every vape pod filling instruction guide.
4. Fill the Pod with E-Liquid
Take your chosen e-liquid bottle and slowly squeeze juice into the pod through the port. Fill it only up to the 2ml mark – don’t overfill, as that can flood the coil. Using a 50/50 PG VG ratio e-liquid works best for the OXVA Xlim to balance flavor and vapor.
5. Replace the Rubber Plug
Once filled, push the rubber plug back into place firmly. Make sure it’s sealed tight because a loose plug is the number one cause of preventing vape leaks. Wipe off any excess liquid before reinserting the pod.
6. Attach the pod cap with the filling complete
Click the pod back into the battery unit. Let the pod rest for 5–10 minutes before vaping. This gives the coil time to absorb the liquid, preventing dry hits. This step is often called priming the coil and is key to longer coil life.
With the filling complete, insert the pod back into the device and let it sit for a few minutes so the coil can absorb the liquid. This “priming time” prevents dry hits and extends coil life. Now, your OXVA Xlim is ready to deliver smooth, flavorful clouds without any hassle.
Want better flavour or longer coil life? Discover the difference in our guide on Mesh Coils VS Regular Coils
Choosing the right e-liquid for your OXVA Xlim Vape Pod Kit
Picking the right juice is just as important as knowing how to Properly Fill Your OXVA Xlim Vape Pod Kit. The wrong choice can lead to burnt coils, poor flavour, or leaks. Here are the key points to remember:
-
Go for a 50/50 PG VG Ratio – The OXVA Xlim works best with balanced e-liquids. A 50/50 PG/VG ratio gives smooth flavour and prevents clogging the pod.
-
Use Nic Salt E-Liquids – If you want a strong, smooth hit that feels closer to smoking, nic salt for pod kits is the best option. They absorb faster and are easier on the throat, even at higher nicotine levels.
-
Freebase E-Liquids for Longer Sessions – Smokers who like low nicotine strengths and large vapor clouds will find freebase varieties fit the choice, although again, they need to be 50/50 blends to avoid incompatibility.
-
Stick to Legal Vape Juice UK – Given that the maximum amount of nicotine allowed in the UK is 20mg/ml, and that bottles containing nicotine cannot be larger than 10ml.
-
Avoid High VG Liquids – Thick, high-VG liquids (like 70/30 mixes) are intended to be used with sub-ohm tanks, not with pod systems. There is a risk of coil burning or vapour inefficiency when using them
-
Experiment with Flavours – From fruity nic salts to classic tobacco, your OXVA pod handles a wide range of flavours. Just make sure they meet TPD UK compliance.
By following these simple rules, you’ll not only get the smoothest vape but also extend your OXVA pod lifespan while enjoying consistent flavour.
Looking for the best option? Check our guide on Shortfill vs Nic Salt E-Liquids
Maintaining Your OXVA V Prime Kit
Even if you know how to Properly Fill Your OXVA Xlim Vape Pod Kit and use the right e-liquid, keeping your device in good shape is just as important. A well-maintained kit not only gives you better flavour but also saves money on replacements. Here are a few simple tips to extend the life of your vape pod system.
1. Clean the Pod Connections Regularly: Dust and e-liquid residue often collect around the pod contacts. Use a tissue or cotton bud to gently wipe the magnetic connectors. This ensures a proper connection between the pod and battery.
2. Refill Before the Pod is Empty: Never wait until your pod is completely dry. Running coils on low liquid can cause dry hits and permanent coil damage. Make a habit of topping up when the pod is at one-quarter capacity.
3. Change Pods When Needed: Every pod has a lifespan. On average, an OXVA pod's lifespan is between 3–7 days, depending on how much you vape. If you notice a burnt taste, reduced vapour, or leaking, it’s time to replace the pod.
4. Charge the Battery Properly: Don’t overcharge your device. Most pod vape kit UK models have safety features, but unplugging when full keeps the battery healthier in the long run.
Following these small steps can double the life of your kit and give you a consistently smooth vape. Think of it as routine care, the same way you’d look after a phone or laptop.
Looking for smoother hits and rich flavours? Check out our list of the Top Vape Juices for Pod Kits UK
UK Vaping Regulations: What You Need to Know
When using your OXVA Xlim or any other refillable pod system, it’s important to know the UK laws that keep vaping safe and standardised. Here are the main rules explained simply:
-
2ml Pod Capacity (TPD Rule) – Every pod vape kit UK must have a maximum tank size of 2ml, which is why your OXVA pod can’t hold more liquid.
-
Nicotine Strength Limit – The maximum legal strength is 20mg/ml. That is why nic salt e-liquids are usually available in 10mg or 20mg strengths.
-
E-liquid Bottle Size – Nicotine must be unavailable in any bottle over 10ml, having smaller bottles to avoid abuse and safer administration.
-
Packaging & Labels – All legal vape juice UK products must come with clear warnings of nicotine on the label and a childproof cap.
-
Age Restriction – Just like cigarettes, you must be 18 or older to legally purchase e-liquids or pod kits in the UK.
-
No Advertising to Minors – Vape manufacturers may not market to or create packaging that encourages use by children or underage individuals.
-
Ingredient Transparency – All e-liquids are TPD UK compliant and are tested for the presence of banned ingredients.
-
Cross-Border Differences – Larger pods, stronger liquids. Don’t even think about it; in the UK, some rules only allow purchase from trusted UK vape shops.
These rules may at times seem constraining, but they are created to ensure vaping’s safety, to make the products predictable, and to put everyone on an even playing field.
Want the ultimate vaping experience? Discover how to build your Perfect Vape Setup with the right device, coils, and e-liquids.
Conclusion
Knowing how to Properly Fill Your OXVA Xlim Vape Pod Kit is more than just pouring some e-liquid into a pod: it is about extending the life of your vape, enhancing its flavor, and maintaining it problem-free. With learning about the parts, having the appropriate vaping practices on how to properly fill them, which e-liquids to use, such as nic salt or 50/50 mix, and keeping your device clean through simple routines, you can have a convenient and memorable vaping session every day.
Restrictions on UK regulations regarding pod capacities and nicotine concentrations can be up to 2ml and 20mg/ml, respectively; however, these regulations should be introduced to help pod-based vaping remain safe and consistent. By using quality juice and cleaning with proper refilling and maintenance, your OXVA Xlim produces great flavour and will not leak or burn coils.
By the end of the day, vaping should be like breathing. A little bit of sitting down will go a long way, and by sticking to the right routine, you won’t only save some money but also keep your pod system working at its best. Remembering the steps, making the right choice of liquid next time you refill, you can get the best out of your OXVA set.